• ** 2008 Custom Street Glide – $35,000 OBO **

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    This 2008 Street Glide is custom to the max! Stock motor is a 96″ 6 speed; but take a look at the list below and see what this bike is about . . . .

    26″ PJD (Paul Jr. Designs) Platinum Cut Renegade Wheel with a matching 13″ rotor & 6 piston caliper Dirty Bird raked corrupt fairing & Dirty Bird “Up Yours” exhaust Big Baller painted windshield Dakota digital gauges Neck rake kit Stretched gas tank 16″ Santee bars Precision custom built Cross floorboards Daymaker headlight Steel stretched rear fender ABS stretched side panels & saddlebags And you cannot miss the amazing custom ghost smoke paint job, the skull mural down the bike is incredible and a must see, so stop by and take a look at this one of a kind FLHX!

    On Display At: Precision Frameworx 70, 5329 72 Ave S.E. Calgary M-F: 9am – 6pm Sat: 9am – 3pm 403.568.1075 Financing is available OAC

    $35,000

  • *** 2008 Saxon Warlord ***

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    This 2008 Saxon Warlord is built with an S&S 111 motor (1819 CC’s), electronic decomp, automatic S&S carb tear drop.
    Chrome forward controls and chrome lower legs.
    It has Billet 6 bolt wheels with full matching floating rotors.

    $19,900.00

  • *** 2010 Harley Davidson FLTR Custom ***

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    This 2010 Custom Road Glide speaks for itself! It’s one loud and proud bike that will turn any and every head.

    • This monster has a 30″ Renegade South Beach wheel
    • Glenndynne Designs 18″ rotor and caliper combination
    • Custom inner and outer fairing with Dakota Digital gauges
    • Stretched tank, side covers, saddlebags and rear fender
    • Custom saddlebag speaker lids
    • Huge S&S 124″ motor with a rear chain drive conversion
    • Custom floorboards, grips, mirrors and painted hand controls.
    • This bike was built in the States but is now a registered Albertan bike.
    • Tach is in miles (726M)

    If you’re looking for something rare, something that stands out – this is the bike for you.
    Pictures don’t do justice, must come and see the detail and work put in.

    $49,900.00

  • 1997 Limited Edition Harley Davidson Softail Springer FLSTS

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    • Upgraded Carburetor
    • Comes with Saddle Bags
    • Chrome Accessories
    • Sissy-Bar Back Rest
    • Spot Lamps / Driving Lamps
    • Engine Guard Pegs

    $18,500.00

  • 2012 Harley Davidson Sportster

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    This Basically Brand New 2012 Harley Davidson Forty Eight is a perfect head turner.

    Bike has a new tinted windshield and Screamin Eagle Mufflers to add to the black beauty.

    It has a mean blacked out look and is super comfortable to ride, this is a must see bike, stop on by to have a look!

    $11,999.99

  • Black and Red Chopper with Flames

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    $14,000

  • West Coast Chopper

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    This is the Original WestCoast (BC) Chopper. This is the style of bike you grew up with or read about in the novels.

    To get this bike today from a builder that could build a bike of this caliber would be double or tripple the cost we’re asking.

    The Facts:

    • Tight Rigid Frame molded and painted
    • Wide Glide Cats Squasher Front End
    • 16″ Front Tire
    • FL Style 16 Spoke Mag Rims With New Tires
    • 18″ Ape Hangers
    • Forward Controls
    • Solo Seat
    • 80 Cubic Inch Evo Engine
    • 4 Speed Kick Only Tranny
    • Hand Made High/Low Exhaust Ceramic Coated Pipes
    • Hand Made Sissy Bar
    • Hand Made Aluminum Oil Bucket
    • Hand Made Cut Down Primary (Removed the Solinoid)
    • Frisco Mounted Gas Tank
    • Retro White Paint with Hand Laid Purple Flames.

    Buy This Today, Make a Statement, You Know You Want It.

    Beats Every Bike Out There In This Price Range.

    $13,000

  • 2008 Thug Prospect

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    This 2008 Thug Prospect was our prototype and it’s ready to go. This beauty has been well taken care of since it was created and well maintained.

    It sports a FX style frame with:

    • 200 rear tire
    • Metzler tires front and back
    • 80spoke billet rims: 21 front, 18 rear
    • Chrome rear progressive shocks
    • FL style front end with 5-3/4 billet headlight
    • Tail dragger rear fender with cut-out for license plate and hidden brake/tail/turn lights
    • Chrome radius struts
    • Hand made solo seat
    • Modified Deuce style gas tank
    • 12 / 14inch 1-1/4 handbars and risers
    • Drive train is a S+S 93 cubic inch High Output engine
    • 4 plug heads with S+S super E carb
    • Compu-fire 32 amp charging system
    • Baker 6 speed kicker transmission with custom kicker
    • 3″ BDL open primary
    • 1.4kw starter
    • Custom exhaust

    $25,000

  • Rootbeer Rocket (sold)

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    Da Boss’s personal bike. Every now and then the owner builds one for himself and this is one of them. Everything is custom made so we don’t need to go into nitty gritty. Heres the meat. 121 cubic inch merch engine. 6 speed tranny. PM hand controls. HHI forward controls and brakes. 3 inch BDL primary P.M rims with painted rim hand. 200 rear tire. House of colors root beer paint with pagan gold flames. Hand made leather seat comes with the bike, not the one shown.

    View Full Gallery

    • 121 Merch Engine
    • 6 speed tranny
    • 3 inch BDL
    • 200 Read tire

    $35,000

  • SOA FXR (sold)

    For more info:

    Email: parts@precisionframeworx.com

    Call: (403) 568-1075

    Featuring:

    Da Boss’s personal bike. Every now and then the owner builds one for himself and this is one of them. Everything is custom made so we don’t need to go into nitty gritty. Heres the meat. 121 cubic inch merch engine. 6 speed tranny. PM hand controls. HHI forward controls and brakes. 3 inch BDL primary P.M rims with painted rim hand. 200 rear tire. House of colors root beer paint with pagan gold flames. Hand made leather seat comes with the bike, not the one shown.

     

    View Full Gallery

    • 121 Merch Engine
    • 6 speed tranny
    • 3 inch BDL
    • 200 Read tire

    $20,000